Building your own shed can be a very rewarding activity. If you want to know how to build a storage shed here are a few pointers that you should know. Let's start from the ground up. You need to choose between a concrete slab foundation and concrete pads for supporting lumber posts of a wooden floor.
If you go with having a concrete floor, make sure that the poured concrete extends below the level in the ground where frost can penetrate. If you go by the wooden floor route, the lumber you use should be treated such that it is resistant to wood rot caused by insects, water, and other factors.
Another tip in How to build a storage shed concerns the framing of your shed walls. The framing lumber used can be of the ordinary kind but the bottom plate should be treated. Again, this is for protection from wood rot. Your shed walls should be strong as well so that they support the roof and will hold against strong wind.
For the roof, you can either buy prefabricated roof trusses or just cut simple roof rafters. Cover the exterior portion of the walls and roof with asphalt felt paper and then apply siding and shingles.
For those who want to know how to build a storage shed doors, it is a nice idea to try a small overhead garage door. It is convenient, does not require a lot of space as you go in and out, and it is easy to install.
Recommend : Civil Engineering Civil Engineering Forum Air ForceCivil Engineer Concrete Column
ไม่มีความคิดเห็น:
แสดงความคิดเห็น